全球主机交流论坛

 找回密码
 注册

QQ登录

只需一步,快速开始

IP归属甄别会员请立即修改密码
查看: 3586|回复: 17
打印 上一主题 下一主题

[lighttpd] [已解决]使用V.P.N一键安装包,结果老是连接错误,

[复制链接]
跳转到指定楼层
1#
发表于 2015-7-26 23:26:47 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
本帖最后由 HKCPC 于 2015-7-27 16:39 编辑

错误日志
Jul 26 10:58:49 扶墙 pptpd[9036]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7)
Jul 26 10:58:49 扶墙 pptpd[9036]: CTRL: Client 182.90.*.44 control connection finished
Jul 26 11:00:09 扶墙 pptpd[9049]: CTRL: Client 182.90.*.44 control connection started
Jul 26 11:00:10 扶墙 pptpd[9049]: CTRL: Starting call (launching pppd, opening GRE)
Jul 26 11:00:10 扶墙 pppd[9050]: Plugin /usr/lib/pppd/2.4.4/radius.so loaded.
Jul 26 11:00:10 扶墙 pppd[9050]: RADIUS plugin initialized.
Jul 26 11:00:10 扶墙 pppd[9050]: This system lacks kernel support for PPP.  This could be because the PPP kernel module could not be loaded, or because PPP was not included in the kernel configuration.  If PPP was included as a module, try `/sbin/modprobe -v ppp'.  If that fails, check that ppp.o exists in /lib/modules/`uname -r`/net. See README.linux file in the ppp distribution for more details.
Jul 26 11:00:10 扶墙 pptpd[9049]: GRE: read(fd=6,buffer=8059a40,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
Jul 26 11:00:10 扶墙 pptpd[9049]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7)
Jul 26 11:00:10 扶墙 pptpd[9049]: CTRL: Client 182.90.*.44 control connection finished
Jul 26 11:01:53 扶墙 pptpd[9120]: CTRL: Client 182.90.*.44 control connection started
Jul 26 11:01:53 扶墙 pptpd[9120]: CTRL: Starting call (launching pppd, opening GRE)
Jul 26 11:01:53 扶墙 pppd[9121]: Plugin /usr/lib/pppd/2.4.4/radius.so loaded.
Jul 26 11:01:53 扶墙 pppd[9121]: RADIUS plugin initialized.
Jul 26 11:01:53 扶墙 pppd[9121]: This system lacks kernel support for PPP.  This could be because the PPP kernel module could not be loaded, or because PPP was not included in the kernel configuration.  If PPP was included as a module, try `/sbin/modprobe -v ppp'.  If that fails, check that ppp.o exists in /lib/modules/`uname -r`/net. See README.linux file in the ppp distribution for more details.
Jul 26 11:01:53 扶墙 pptpd[9120]: GRE: read(fd=6,buffer=8059a40,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
Jul 26 11:01:53 扶墙 pptpd[9120]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7)
Jul 26 11:01:53 扶墙 pptpd[9120]: CTRL: Client 182.90.*.44 control connection finished
Jul 26 11:03:04 扶墙 pptpd[9123]: CTRL: Client 182.90.*.44 control connection started
Jul 26 11:03:04 扶墙 pptpd[9123]: CTRL: Starting call (launching pppd, opening GRE)
Jul 26 11:03:04 扶墙 pppd[9124]: Plugin /usr/lib/pppd/2.4.4/radius.so loaded.
Jul 26 11:03:04 扶墙 pppd[9124]: RADIUS plugin initialized.
Jul 26 11:03:04 扶墙 pppd[9124]: This system lacks kernel support for PPP.  This could be because the PPP kernel module could not be loaded, or because PPP was not included in the kernel configuration.  If PPP was included as a module, try `/sbin/modprobe -v ppp'.  If that fails, check that ppp.o exists in /lib/modules/`uname -r`/net. See README.linux file in the ppp distribution for more details.
Jul 26 11:03:04 扶墙 pptpd[9123]: GRE: read(fd=6,buffer=8059a40,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
Jul 26 11:03:04 扶墙 pptpd[9123]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7)
Jul 26 11:03:04 扶墙 pptpd[9123]: CTRL: Client 182.90.*.44 control connection finished
Jul 26 11:04:24 扶墙 pptpd[9144]: MGR: connections limit (100) reached, extra IP addresses ignored
Jul 26 11:04:24 扶墙 pptpd[9145]: MGR: Manager process started
Jul 26 11:04:24 扶墙 pptpd[9145]: MGR: Maximum of 100 connections available
Jul 26 11:04:46 扶墙 pptpd[9147]: CTRL: Client 182.90.*.44 control connection started
Jul 26 11:04:47 扶墙 pptpd[9147]: CTRL: Starting call (launching pppd, opening GRE)
Jul 26 11:04:47 扶墙 pppd[9148]: Plugin /usr/lib/pppd/2.4.4/radius.so loaded.
Jul 26 11:04:47 扶墙 pppd[9148]: RADIUS plugin initialized.
Jul 26 11:04:47 扶墙 pppd[9148]: This system lacks kernel support for PPP.  This could be because the PPP kernel module could not be loaded, or because PPP was not included in the kernel configuration.  If PPP was included as a module, try `/sbin/modprobe -v ppp'.  If that fails, check that ppp.o exists in /lib/modules/`uname -r`/net. See README.linux file in the ppp distribution for more details.
Jul 26 11:04:47 扶墙 pptpd[9147]: GRE: read(fd=6,buffer=8059a40,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
Jul 26 11:04:47 扶墙 pptpd[9147]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7)
Jul 26 11:04:47 扶墙 pptpd[9147]: CTRL: Client 182.90.*.44 control connection finished
Jul 26 11:06:01 扶墙 pptpd[9201]: CTRL: Client 182.90.*.44 control connection started
Jul 26 11:06:01 扶墙 pptpd[9201]: CTRL: Starting call (launching pppd, opening GRE)
Jul 26 11:06:01 扶墙 pppd[9202]: Plugin /usr/lib/pppd/2.4.4/radius.so loaded.
Jul 26 11:06:01 扶墙 pppd[9202]: RADIUS plugin initialized.
Jul 26 11:06:01 扶墙 pppd[9202]: This system lacks kernel support for PPP.  This could be because the PPP kernel module could not be loaded, or because PPP was not included in the kernel configuration.  If PPP was included as a module, try `/sbin/modprobe -v ppp'.  If that fails, check that ppp.o exists in /lib/modules/`uname -r`/net. See README.linux file in the ppp distribution for more details.
Jul 26 11:06:01 扶墙 pptpd[9201]: GRE: read(fd=6,buffer=8059a40,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
Jul 26 11:06:01 扶墙 pptpd[9201]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7)
Jul 26 11:06:01 扶墙 pptpd[9201]: CTRL: Client 182.90.*.44 control connection finished
Jul 26 11:09:28 扶墙 pptpd[9232]: MGR: connections limit (100) reached, extra IP addresses ignored
Jul 26 11:09:28 扶墙 pptpd[9233]: MGR: Manager process started
Jul 26 11:09:28 扶墙 pptpd[9233]: MGR: Maximum of 100 connections available
Jul 26 11:09:46 扶墙 pptpd[9235]: CTRL: Client 182.90.*.44 control connection started
Jul 26 11:09:46 扶墙 pptpd[9235]: CTRL: Starting call (launching pppd, opening GRE)
Jul 26 11:09:46 扶墙 pppd[9236]: Plugin /usr/lib/pppd/2.4.4/radius.so loaded.
Jul 26 11:09:46 扶墙 pppd[9236]: RADIUS plugin initialized.
Jul 26 11:09:46 扶墙 pppd[9236]: This system lacks kernel support for PPP.  This could be because the PPP kernel module could not be loaded, or because PPP was not included in the kernel configuration.  If PPP was included as a module, try `/sbin/modprobe -v ppp'.  If that fails, check that ppp.o exists in /lib/modules/`uname -r`/net. See README.linux file in the ppp distribution for more details.
Jul 26 11:09:46 扶墙 pptpd[9235]: GRE: read(fd=6,buffer=8059a40,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
Jul 26 11:09:46 扶墙 pptpd[9235]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7)
Jul 26 11:09:46 扶墙 pptpd[9235]: CTRL: Client 182.90.*.44 control connection finished



环境
hostodo 那个10刀开出的VPS :Centos 5 64位  是不是这个的问题,这个好像是OVZ吧。

182.90.*.44 这个是我的ip.  连接错误为619错误

在Radius 查看服务状态显示如下
Service Status

Radius  Enabled  
Mysql  Enabled

那位大神帮忙解惑一下。

2#
发表于 2015-7-27 01:21:08 | 只看该作者
重启机器了没有? 不会使用我的一键安装脚本吧?
3#
发表于 2015-7-27 02:05:43 | 只看该作者
619 /691 检查账号密码配置
4#
 楼主| 发表于 2015-7-27 09:11:54 | 只看该作者
Ruclinux 发表于 2015-7-27 01:21
重启机器了没有? 不会使用我的一键安装脚本吧?

重启无效。。就那个三合一的,不知道是谁的。。。
5#
 楼主| 发表于 2015-7-27 09:13:17 | 只看该作者
西秦公子 发表于 2015-7-27 02:05
619 /691 检查账号密码配置

应该不是,你看一下日志吧,
6#
发表于 2015-7-27 11:06:28 | 只看该作者
radiusd -X 看
7#
 楼主| 发表于 2015-7-27 11:39:51 | 只看该作者

[root@扶墙 ~]# radiusd -X
FreeRADIUS Version 2.1.12, for host i386-redhat-linux-gnu, built on Jan  9 2013 at 05:02:57
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/krb5
including configuration file /etc/raddb/modules/ntlm_auth
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/cui
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/redis
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/otp
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/rediswho
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/replicate
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/smsotp
including configuration file /etc/raddb/modules/dynamic_clients
including configuration file /etc/raddb/modules/soh
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/opendirectory
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/sql.conf
including configuration file /etc/raddb/sql/mysql/dialup.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/control-socket
main {
        user = "radiusd"
        group = "radiusd"
        allow_core_dumps = no
}
including dictionary file /etc/raddb/dictionary
main {
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        pidfile = "/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
}
security {
        max_attributes = 200
        reject_delay = 1
        status_server = yes
}
}
8#
发表于 2015-7-27 11:40:55 | 只看该作者
我也有这问题,后来实在弄不出来就换了ss,ss稳定多了
9#
 楼主| 发表于 2015-7-27 11:40:56 | 只看该作者
radiusd: #### Loading Realms and Home Servers ####
proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
}
home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = "testing123"
        response_window = 20
        max_outstanding = 65536
        require_message_authenticator = yes
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        num_answers_to_alive = 3
        num_pings_to_alive = 3
        revive_interval = 120
        status_check_timeout = 4
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
}
home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
}
realm example.com {
        auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = "fashidea"
        nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/raddb/modules/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
  }
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/raddb/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration
  expiration {
        reply-message = "Password Has Expired  "
  }
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime
  logintime {
        reply-message = "You are calling outside your allowed timespan  "
        minimum-timeout = 60
  }
}
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
modules {
  Module: Creating Auth-Type = digest
  Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/raddb/modules/pap
  pap {
        encryption_scheme = "auto"
        auto_header = no
  }
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/raddb/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = no
        allow_retry = yes
  }
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file /etc/raddb/modules/digest
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/raddb/modules/unix
  unix {
        radwtmp = "/var/log/radius/radwtmp"
  }
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /etc/raddb/eap.conf
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 4096
  }
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
   tls {
        rsa_key_exchange = no
        dh_key_exchange = yes
        rsa_key_length = 512
        dh_key_length = 512
        verify_depth = 0
        CA_path = "/etc/raddb/certs"
        pem_file_type = yes
        private_key_file = "/etc/raddb/certs/server.pem"
        certificate_file = "/etc/raddb/certs/server.pem"
        CA_file = "/etc/raddb/certs/ca.pem"
        private_key_password = "whatever"
        dh_file = "/etc/raddb/certs/dh"
        random_file = "/etc/raddb/certs/random"
        fragment_size = 1024
        include_length = yes
        check_crl = no
        cipher_list = "DEFAULT"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
    }
   }
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
   ttls {
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
   }
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
   peap {
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
   }
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess
  preprocess {
        huntgroups = "/etc/raddb/huntgroups"
        hints = "/etc/raddb/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /etc/raddb/modules/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /etc/raddb/modules/files
  files {
        usersfile = "/etc/raddb/users"
        acctusersfile = "/etc/raddb/acct_users"
        preproxy_usersfile = "/etc/raddb/preproxy_users"
        compat = "no"
  }
10#
 楼主| 发表于 2015-7-27 11:42:26 | 只看该作者
Module: Linked to module rlm_sql
Module: Instantiating module "sql" from file /etc/raddb/sql.conf
  sql {
        driver = "rlm_sql_mysql"
        server = "127.0.0.1"
        port = ""
        login = "radius"
        password = "123456"
        radius_db = "radius"
        read_groups = yes
        sqltrace = no
        sqltracefile = "/var/log/radius/sqltrace.sql"
        readclients = no
        deletestalesessions = yes
        num_sql_socks = 5
        lifetime = 0
        max_queries = 0
        sql_user_name = "%{User-Name}"
        default_user_profile = ""
        nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
        authorize_check_query = "SELECT id, username, attribute, value, op           FROM radcheck           WHERE username = '%{SQL-User-Name}'           ORDER BY id"
        authorize_reply_query = "SELECT id, username, attribute, value, op           FROM radreply           WHERE username = '%{SQL-User-Name}'           ORDER BY id"
        authorize_group_check_query = "SELECT id, groupname, attribute,           Value, op           FROM radgroupcheck           WHERE groupname = '%{Sql-Group}'           ORDER BY id"
        authorize_group_reply_query = "SELECT id, groupname, attribute,           value, op           FROM radgroupreply           WHERE groupname = '%{Sql-Group}'           ORDER BY id"
        accounting_onoff_query = "          UPDATE radacct           SET              acctstoptime       =  '%S',              acctsessiontime    =  unix_timestamp('%S') -                                    unix_timestamp(acctstarttime),              acctterminatecause =  '%{Acct-Terminate-Cause}',              acctstopdelay      =  %{%{Acct-Delay-Time}:-0}           WHERE acctstoptime IS NULL           AND nasipaddress      =  '%{NAS-IP-Address}'           AND acctstarttime     <= '%S'"
        accounting_update_query = "           UPDATE radacct           SET              framedipaddress = '%{Framed-IP-Address}',              acctsessiontime     = '%{Acct-Session-Time}',              acctinputoctets     = '%{%{Acct-Input-Gigawords}:-0}'  << 32 |                                    '%{%{Acct-Input-Octets}:-0}',              acctoutputoctets    = '%{%{Acct-Output-Gigawords}:-0}' << 32 |                                    '%{%{Acct-Output-Octets}:-0}'           WHERE acctsessionid = '%{Acct-Session-Id}'           AND username        = '%{SQL-User-Name}'           AND nasipaddress    = '%{NAS-IP-Address}'"
        accounting_update_query_alt = "           INSERT INTO radacct             (acctsessionid,    acctuniqueid,      username,              realm,            nasipaddress,      nasportid,              nasporttype,      acctstarttime,     acctsessiontime,              acctauthentic,    connectinfo_start, acctinputoctets,              acctoutputoctets, calledstationid,   callingstationid,              servicetype,      framedprotocol,    framedipaddress,              acctstartdelay,   xascendsessionsvrkey)           VALUES             ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',              '%{SQL-User-Name}',              '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',              '%{NAS-Port-Type}',              DATE_SUB('%S',                       INTERVAL (%{%{Acct-Session-Time}:-0} +                                 %{%{Acct-Delay-Time}:-0}) SECOND),                       '%{Acct-Session-Time}',              '%{Acct-Authentic}', '',              '%{%{Acct-Input-Gigawords}:-0}' << 32 |              '%{%{Acct-Input-Octets}:-0}',              '%{%{Acct-Output-Gigawords}:-0}' << 32 |              '%{%{Acct-Output-Octets}:-0}',              '%{Called-Station-Id}', '%{Calling-Station-Id}',              '%{Service-Type}', '%{Framed-Protocol}',              '%{Framed-IP-Address}',              '0', '%{X-Ascend-Session-Svr-Key}')"
        accounting_start_query = "           INSERT INTO radacct             (acctsessionid,    acctuniqueid,     username,              realm,            nasipaddress,     nasportid,              nasporttype,      acctstarttime,    acctstoptime,              acctsessiontime,  acctauthentic,    connectinfo_start,              connectinfo_stop, acctinputoctets,  acctoutputoctets,              calledstationid,  callingstationid, acctterminatecause,              servicetype,      framedprotocol,   framedipaddress,              acctstartdelay,   acctstopdelay,    xascendsessionsvrkey)           VALUES             ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',              '%{SQL-User-Name}',              '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',              '%{NAS-Port-Type}', '%S', NULL,              '0', '%{Acct-Authentic}', '%{Connect-Info}',              '', '0', '0',              '%{Called-Station-Id}', '%{Calling-Station-Id}', '',              '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',              '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')"
        accounting_start_query_alt = "           UPDATE radacct SET              acctstarttime     = '%S',              acctstartdelay    = '%{%{Acct-Delay-Time}:-0}',              connectinfo_start = '%{Connect-Info}'           WHERE acctsessionid  = '%{Acct-Session-Id}'           AND username         = '%{SQL-User-Name}'           AND nasipaddress     = '%{NAS-IP-Address}'"
        accounting_stop_query = "           UPDATE radacct SET              acctstoptime       = '%S',              acctsessiontime    = '%{Acct-Session-Time}',              acctinputoctets    = '%{%{Acct-Input-Gigawords}:-0}' << 32 |                                   '%{%{Acct-Input-Octets}:-0}',              acctoutputoctets   = '%{%{Acct-Output-Gigawords}:-0}' << 32 |                                   '%{%{Acct-Output-Octets}:-0}',              acctterminatecause = '%{Acct-Terminate-Cause}',              acctstopdelay      = '%{%{Acct-Delay-Time}:-0}',              connectinfo_stop   = '%{Connect-Info}'           WHERE acctsessionid   = '%{Acct-Session-Id}'           AND username          = '%{SQL-User-Name}'           AND nasipaddress      = '%{NAS-IP-Address}'"
        accounting_stop_query_alt = "           INSERT INTO radacct             (acctsessionid, acctuniqueid, username,              realm, nasipaddress, nasportid,              nasporttype, acctstarttime, acctstoptime,              acctsessiontime, acctauthentic, connectinfo_start,              connectinfo_stop, acctinputoctets, acctoutputoctets,              calledstationid, callingstationid, acctterminatecause,              servicetype, framedprotocol, framedipaddress,              acctstartdelay, acctstopdelay)           VALUES             ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',              '%{SQL-User-Name}',              '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',              '%{NAS-Port-Type}',              DATE_SUB('%S',                  INTERVAL (%{%{Acct-Session-Time}:-0} +                  %{%{Acct-Delay-Time}:-0}) SECOND),              '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '',              '%{Connect-Info}',              '%{%{Acct-Input-Gigawords}:-0}' << 32 |              '%{%{Acct-Input-Octets}:-0}',              '%{%{Acct-Output-Gigawords}:-0}' << 32 |              '%{%{Acct-Output-Octets}:-0}',              '%{Called-Station-Id}', '%{Calling-Station-Id}',              '%{Acct-Terminate-Cause}',              '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',              '0', '%{%{Acct-Delay-Time}:-0}')"
        group_membership_query = "SELECT groupname           FROM radusergroup           WHERE username = '%{SQL-User-Name}'           ORDER BY priority"
        connect_failure_retry_delay = 60
        simul_count_query = ""
        simul_verify_query = "SELECT radacctid, acctsessionid, username,                                nasipaddress, nasportid, framedipaddress,                                callingstationid, framedprotocol                                FROM radacct                                WHERE username = '%{SQL-User-Name}'                                AND acctstoptime IS NULL"
        postauth_query = "INSERT INTO radpostauth                           (username, pass, reply, authdate)                           VALUES (                           '%{User-Name}',                           '%{%{User-Password}:-%{Chap-Password}}',                           '%{replyacket-Type}', '%S')"
        safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to [email protected]:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|手机版|小黑屋|全球主机交流论坛

GMT+8, 2026-1-15 11:00 , Processed in 0.066734 second(s), 10 queries , Gzip On, MemCache On.

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表